NIM

Thx for the news..

I see to printers with the same name.. Can you make a screenshot of the sharing tab please..

Unbelievable, we got a 1000 new members in about 2 months

Please, right click on the printer and choose properties. Select security tab and post a screenshot here. thx

Pay attention to your forum member status..

If you want to ping #1 from #2 you should allow File and Printer Sharing on computer #1. Actually, the best way is to enable this on both computers in firewall settings. What kind of printer is that. Does it have a network card, did you setup printer permissions properly.. Could you please give me more info, so I can investigate... Regards

I moved this topic to INF discussion forum where it will stay pinned.

Nice work! Welcome to the Forums..

I might add that RapidShare manager isn't working properly. If you have a download list in it, after the restart, the list is lost. Webex Access isn't working also (if anyone is using this)..

Try this: Verify that the following conditions are true: Your Firewall will allow the Dmremote.exe process. TCP port 135 is open. How you perform this verification process depends on your particular firewall. For example, to do this in Windows Firewall, follow these steps: Click Start, click Run, type firewall.cpl, and then click OK. Click the Exceptions tab. Click Add Program, and then type C:\WINDOWS\system32\dmremote.exe. Click OK. Click Add Port. In the Name box, type TCP port 135. In the Port number box, type 135, click TCP, and then click OK two times. Click Start, click Run, type dcomcnfg, and then click OK. In the Component Services window, expand Component Services, and then click Computers. Right-click My Computer, and then click Properties. Click the COM Security tab. In the Access Permissions area, click Edit Limits. Click ANONYMOUS LOGON. In the bottom pane, click to select the Remote Access check box in the Allow column, and then click OK. In the Launch and Activation Permissions area, click Edit Limits. Click Everyone, and then in the Allow column, click to select the Remote Launch and Remote Activation check boxes. Click OK two times, and then restart the computer. I've tried this on Vista-->Windows 7 but it won't work. Maybe you'll have more luck with XP. If that doesn't help, I'll investigate more..

Please don't double post again.

Try to google for XP Theme Source Patcher New forum was crawled in less than one day..

This behavior can also occur when the access in Distributed Component Object Model (COM) Configuration (Dcomcnfg) properties for the default authentication level is changed from Connect to Default.(Remote Computer). To resolve this behavior, follow these steps: On the toolbar, click Start, click Run, and then type: dcomcnfg On the Default Properties tab, change the Default Authentication Level to Connect. Restart your computer. If you have some Oracle installations on that PC let me know, if the above info won't help.

It's probably a firewall exception issue. Try this: Method 1: Use the Netsh command-line tool On the remote Windows XP SP2-based computer, run a netsh command to allow traffic through Windows Firewall on TCP port 445: 1. Click Start, click Run, type cmd in the Open box, and then click OK. 2. Type the following command, and then press ENTER: netsh firewall set portopening tcp 445 smb enable On message click Ok. 3. Close the command prompt. Method 2: Use the Graphical User Interface On the remote Windows XP SP2-based computer, modify Windows Firewall to allow incoming TCP traffic on port 445: 1. Click Start, and then click Control Panel. 2. Click Security Center, and then click Windows Firewall. 3. Click the Exceptions tab, click to select the File and Printer Sharing check box, and then click Edit. 4. Click to select the TCP 445 check box, click Change scope, and then take one of the following actions: * Click My network (subnet) only. * Click Custom list, and then type the IP addresses that you want to manage this computer. 5. Click OK four times. Hope this helps..

I wouldn't say that. Probably those who have read this topic didn't know how to help you.

Useful info runningfool. Thx I also don't like when I'm trying to delete something, win7 starts to calculate...........still calculating, and eventually I can't delete the file

It's still beta so I guess it's not optimized yet very well

I've just installed second beta of this product and it seems that it is even slower than previous version. Unlike their test board which is flying!..

I can add this. Since this project is rising and it's already become to big for only one topic I propose this. - I can create a Subforum in Wincert Member Projects Forum so this project would have it's dedicated forum. - I can give moderator permissions to at least one or two members who would lead that forum - I will also give FTP Access to our unlimited bandwidth and unlimited space server for this project - Another solution is to create a category on Joomla Frontpage (www.wincert.net) where we could present this or any future projects. Support would be redirected to project's dedicated forum If you guys are interested send me a PM.

Please post your requests in the Addons Discussion forum. Thx

Moved to a proper section. Also , you could have posted in the Spanish Forum here: http://www.wincert.net/forum/index.php?showforum=163

welcome to wincert mate

Hello dear guests and members, As our site grows rapidly, we're glad to announce that we've accepted several kind donations from our members, thus helping us with our server expenses and keeping this site alive. As our expenses grow, Administration team is considering a partnership with one Hosting Company which won't be named at this point. If Current and Future Web Masters decide to take one of hosting packages from our partners, they would get several benefits: - Cheap Hosting Packages - Unmetered Bandwidth - High Availabilty Servers - With hosting package bought, you will automatically sponsor WinCert.net and thus would get benefits stated in this topic. If you're interested, we kindly ask you to cast your vote in this poll and also reply in this topic if you can. Regards, WinCert.net Admin Team

Never heard of those two. I still stand for Corsair.

Enough of this already. I'll close the topic until I speak with Rick and wolfcall.