blackace

thanks for the reply, but I already tried this method and it doesn't fix the problem. maybe reformatting is the solution. I'll use Vista again and if Microsoft released a Service Pack for Windows 7 I'll use 7 as my OS again. Thank You So Much for your reply.

hello everyone, i've encountered this problem first, when I defrag my pc, second, after i used windows updates.. After i've restart the computer, there's no animated bootscreen that appeared and it stays as a blank screen(black screen maybe).. there's no option like safe mode, restore to last known good configuration etc... after my bios checked for my devices, there it goes.. a Blank screen.. I tried using startup repair but it doesn't fix, even bootsec /fixmbr and /fixboot doesn't fix it? is it a virus? or a corrupt files?

:thumbsup_anim: well, all your tips really helps.. I'm going to start buying a new motherboard and thermal cooling paste, that's what I need for now.. When I'm holding the new Motherboard and my Old CPU, I must put my other hand to the metal case in order to discharge the static electricity, right? :icon_cool:

thank you for this videos it helps a lot.. what about my cpu? will i encounter overheating because I didn't apply thermal cooling paste? It's Pentium D...

thanks for the replies guys. well this will be my first time to install a motherboard on my own because I'm only looking forward to the pci-e feature of the motherboards and its similarity specs with my old "mobo".. What will be the bad effects of transferring the parts of my old MOBO to the new MOBO like the processor, cpu fan, hard disk, ram, cd drives, modems etc.. what problems will i perhaps encounter? I also want to ask to some of you who already bought mobo on their own, Does new MOBO includes thermal cooling paste? if not, where is it included? is it necessary to apply new thermal cooling to the new MOBO? or i just install it as normal? :thumbsup_anim: :welcome: :sweatingbullets:

Hi everyone. I'm planning to buy a new motherboard because my pc's motherboard doesn't have a pci-e slot and there's no agp8x videocard available in our market right now. I've read on some websites that electro static wrist strap is important when constructing a new pc. I will only buy a motherboard which is LGA 775 socket because my old motherboard is also using that socket. Is it a good idea that i will wrap my fingers with electrical tape as an alternate method using the electro static wrist strap because there is no electro static wrist strap available in our market.... another thing is that, can i use the old devices in my motherboard? such as DDR2 RAM, HDD, COMBO CD WRITER, PCI MODEM.. The motherboard that i will buy is just similar to my old but it has pci-e and it is new but it is still DDR2, ATX, and LGA 775 Socket.... Can i still use my old cpu? it's expensive to buy a new cpu.. Sir N1K and to all Members, I need your help..THANK YOU VERY MUCH :welcome: :thumbsup_anim: :sweatingbullets: btw, here's the spec for my old motherboard: CPU LGA775 socket for latest Intel Core 2 Duo / Pentium D / Pentium 4 / Celeron D processor FSB 1066/800/533 MHz Support Hyper-Threading Technology CHIPSET VIA® P4M800Pro & VT8237R+ North Bridge: VIA® P4M800Pro South Bridge: VIA® VT8237R+ GRAPHICS Integrated S3 UniChrome 2D/3D Graphics MEMORY 2 x 240-pin DDR2 DIMM socket support up to 2 GB Support DDR2 533 DDR2 SDRAM EXPANSION SLOT 1 x AGP 8X slot 3 x PCI slots 1 x CNR slot STORAGE Supported by VIA VT8237R+ 4 x Ultra DMA133/100/66 devices 2 x Serial ATA devices RAID0 & RAID1 configuration AUDIO Realtek ALC655 6-Channel audio CODEC Compliant with AC'97 2.3 specification LAN VIA® VT6103L 10/100 Mbps Fast Ethernet PHY REAR PANEL I/O 1 x PS/2 keyboard & PS/2 mouse connectors 1 x Parallel port (LPT) 1 x Serial port (COM1) 1 x VGA port 4 x USB ports 1 x RJ45 LAN connector 1 x Audio port (Line-in, Line-out, Mic-in) INTERNAL I/O CONNECTORS & HEADERS 1 x 24-pin ATX Power Supply connector 1 x 4-pin ATX 12V connector 1 x FDD connector 2 x IDE connectors 2 x Serial ATA connectors 2 x USB 2.0 headers support additional 4 USB Ports 1 x Buzzer 1 x IrDA for SIR header 1 x Front panel switch/LED header 1 x Front panel audio header AUX-in header 1 x CD in header CPUFAN/SYSFAN connectors SYSTEM BIOS AMI BIOS with 4Mb Flash ROM Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI Supports ACPI revision 1.0 specification FORM FACTOR Micro-ATX Size, 244mm*220mm the spec of the motherboard that i will buy: CPU LGA775 socket for Intel Pentium 4/ Celeron D/ Pentium D processor FSB 1066/800/533 MHz Support Hyper-Threading Technology CHIPSET Intel® 945P & ICH7R North Bridge: Intel® 945P South Bridge: Intel® ICH7R MEMORY Dual-channel DDR2 memory architecture 4 x 240-pin DDR2 DIMM socket support up to 4 GB Support DDR2 667/533/400 DDR2 SDRAM EXPANSION SLOT 2 x PCI Express x16 slots 2 x PCI Express x16 slot (Orange : x16 mode, Blue : x4 mode) 1 x PCI Express x1 slot * 2 x PCI Express x1 slot (x1 or *diabled mode) 3 x PCI slots *when use two PCI Express VGA card, this slot is disable STORAGE Supported by Intel®ICH7R 2 x Ultra DMA100/66 devices 4 x Serial ATAII 3.0Gb/s devices RAID0, RAID1, RAID0+1, RAID5 configuration Supported by SiI3132 2 x Serial ATAII 3.0Gb/s devices RAID0, RAID1& e-SATA configuration AUDIO Realtek ALC880 8-channel audio CODEC IEEE 1394a VIA® VT6307, support 2x IEEE1394a ports DUAL LAN Marvell 88E8053 PCI-E Gigabit LAN controller Realtek RTL8100C 10/100 LAN controller REAR PANEL I/O 1 x PS/2 keyboard & PS/2 mouse connectors 4 x USB ports 2 x RJ45 LAN connectors 1 x 1394a connector (4-pin) 1 x SPDIF in connector 1 x Serial port (COM1) 1 x FAN Duct 1 x Audio port (Line-in,4x Line-out, SPDIF out) INTERNAL I/O CONNECTORS & HEADERS 1 x 24-pin ATX Power Supply connector 1 x 4-pin ATX 12V connector 1 x FDD connector supports two 360K~2.88MB FDDs 1 x IrDA for SIR header 1 x Speaker header 1 x 1394a header 2 x USB 2.0 headers support additional 4 USB Ports 6 x Serial ATA 3Gb/s connectors 1 x Front panel switch/LED header 1 x Front panel audio header 1 x CD in header CPUFAN/NB_FAN/3x SYSFAN connectors SYSTEM BIOS AMI BIOS with 4Mb Flash ROM Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI Supports ACPI revision 1.0 specification FORM FACTOR ATX Size, 305mm*244mm

i just want to ask if , do you know some programs that would force all my programs to use a proxy localhost or 127.0.0.1 port 8080 as a proxy to connect to the internet? i use jap/jondo as my ip hider and it uses port 8080 and localhost to be enable all the programs like firefox and internet explorer that has a manual proxy configuration to use jap/jondo.. thanks in advance....

yeah, thanks! Sorry again to all of you! :sweatingbullets: :icon_cool:

sorry men, I do not force you all to do my homework I'm just asking if someone is interested to do it for me. But, I'm sorry because I don't know the rules. Hope you forgive me all. :thumbsdown_anim: :crying_anim02: :crying_anim02:

Guys, I had a project again. My teacher want me to have a project about microsoft word. I will create data's about microsoft word and make it via powerpoint. Can you make it for me??? Peace if none, It's alright.

the hell!? that computer is an old age PC. Wahahaha! :worthy:

moonwalk has been the best dance moves of MJ. :icon_cool:

hahaha! awesome! Being a student is always :thumbsup_anim: :icon_cool: :icon_cool: accompanied by hardwork!

I haven't use Windows 2000, what's the feature that make it the best men? could you tell me? :thumbsup_anim: :icon_cool:

yeah that's true. Win 7 is the best compared to vista. Maybe 7, is just a fix for vista :icon_cool:

using transformation pack could help.

Oh, thank you very much. I'm going to try that one. :icon_cool:

Oh boy, what's all about him? Let him rest, don't bother MJ. :sleeping:

guys, do you know the trick in MS Word 2003 or 2007 that could change the shortcut keys in it? for example, the shortcut key for cut and paste is ctrl+x and ctrl+v. Now, I want to change the shortcut key for cut and paste on my own. Is it possible or not? :sweatingbullets: :sweatingbullets: :help: :help:

Yeah, that's the main feature of Windows 7. But I'm still waiting for the release of Windows 7 here in the Philippines, If Windows 7 will be available here within this year, I'm going to use Windows 7 in Virtual PC with XP. :icon_cool:

thank you very much! :thumbsup_anim: now, I could pass my project early. Thanks Brother! :thumbsup_anim: Off-Topic Comment(Click to Show) please don't delete this topic. I'm still going to visit this topic. Thanks.[Close]

I need only a shortcut using ctrl key. Thanks for the help Gupta :thumbsup_anim: :icon_cool: