x23piracy

Hi, i mean setup is running very short just 2 seconds after extraction, iam sure it cannot access the classic.xml and then abort. I dont see any other reason, if i start the same sfx after first logon it will install just fine. Greetz X23

Hi, i tried rufus and its still the same. Argh iam lost. Greetz X23

Hi, i don't know since which build of my AIO this is happen but after a clean install i have C:\Windows.old C:\Windows.old.000 and C:\Windows in the C root. How can this happen? ...I should start from scratch! EDIT: Forget it guys iam to hard in rage because of the not working usb stick in another thread from me. I just didn't deleted the existing windows installation on the hdd so the setup made a backup dir for the windows directory. No Problem! SOLVED Greetz X23

Hi, test is done i just copied the same contents from 2.0 to usb 3.0 stick and same error message. So iam sure my build is ok and this problem is something special with that usb 3.0 stick. 2 possibilities i think: - WinPE trys to install bootloader on the usb stick instead of hdd - WinPE gives the USB 3.0 a wrong assigned drive letter?! Any idea? Greetz X23

Hi, the system is usb 2.0 only... older hp workstation so only black usb ports no blue one. I will try to copy the blank windows 7 from the usb 2.0 stick to the 3.0 one. Greetz X23

Hi, when i first boot with a prepared usb 2.0 stick and when the select partition dialog appears i switch the usb sticks 2.0 against 3.0 (Sandisk 32GB) it works no error message. Maybe windows setup trys to install the bootloader on the sandisk stick instead of the hdd? Maybe winpe gives the usb 3.0 a drive letter internally? Greetz X23

Hi, first i tried with wintoolkit and the sandisk didn't boot. then i tried the microsoft tool to create a usb stick, with that it boot but now i have a another mistake. Setup will find all hdds but will not install to any of it the error message is: I have to translate from german to english by myself... Setup cannot create a new system partition or find an existing partition to install to... But i see all the harddisks and i also can create or delete partitions on them but if i choose one partition to install to i get the error message above... Damn i shouldn't bougth a usb 3.0 i should took a usb 2.0 one. What a bull****... (related to usb 3.0) I do the same procedure with an usb 2.0 stick anything works. Greetz X23

Hi, i have a Sandisk Extreme 32GB 3.0 Stick here and i cannot bring it to boot my custom windows 7. If i try the same procedure with an older 4GB USB 2.0 Stick it works. Has anyone experience with the Sandisk Stick? I specialy bougth it to boot windows from argh... Greetz X23

Hi, i use that tool sorry if that info was missing. setup.exe and switches are /quiet /config Classic.xml but as explained that doesnt work if i use a batch infront of the setup.exe it works. Greetz X23

Hi, i have some problems with installing silent installers. For example i have Microsoft Navision (setup.exe and a Classic.xml) To install silent i use (/quiet /config Classic.xml) that works while testing on a running system. But when the Installer is calling that it doesn't work. So iam sure this have to do with the working directory when installer is callung Classic.xml (What is the working directory installer uses when triggering any of the sfx)? What would be the best way for a full path? setup.exe /quiet /config %cd%\Classic.xml?will this work? As Workaround i didnt used setup.exe i created a setup.bat setup.exe /quiet /config Classic.xmldel setup.batlike that it works but i think its dirty because the setup.bat isnt necessary and i dont want to use it, calling setup.exe directly is the right way but how? Another thing is i install some reg files with batches and they also fail cannot find the entrys later in the system registry. I use the following syntax with an sfx: reg import file.regSeems to be the same failure with working directory as above, should i here also use reg import %cd%\file.reg? Is this Problem is not related to the working directory is it possible that installer doesnt trigger the sfx with admin rights? For example i have Broadgun a pdf printer, i also install it via a batch setup.bat and it also not work if the installer has finished. I know if i try my sfx on a test system it will only install broadgun correctly if i start the sfx with admin right, so with which rights installer starts the sfx that should be installed? Greetz X23

Hi, i mostly use a unattended setup but i keep the question about windows 7 edition, and partitioning. Later in Setup with Installer (WTK) i install a program that will need to enter the destination hostname for its configuration to work. What if i disable: <ComputerName>*</ComputerName>at what position setup will ask me for the computername?, it important that this will happen before Installer (WTK) is executed. BTW is it possible to get the hostname question at the beginning of the windows 7 setup (when it asks for edition and partitioning)? Greetz X23

Hi, i will try to sort it, wsim doesnt cry with that file. did it. Greetz X23

Hi, sure: <?xml version="1.0" encoding="utf-8"?><unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="specialize"> <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <AllowedSites></AllowedSites> <BlockPopups>yes</BlockPopups> <FilterLevel>High</FilterLevel> <PlaySound>false</PlaySound> <FavoritesDelete>true</FavoritesDelete> <ShowInformationBar>true</ShowInformationBar> <DisableFirstRunWizard>true</DisableFirstRunWizard> <DisableOOBAccelerators>true</DisableOOBAccelerators> <DisableWelcomePage>true</DisableWelcomePage> <LockToolbars>true</LockToolbars> <Home_Page>http://www.google.de</Home_Page> <LocalIntranetSites></LocalIntranetSites> <SearchScopes> <Scope wcm:action="add"> <ScopeDefault>true</ScopeDefault> <ScopeDisplayName>Google</ScopeDisplayName> <ScopeKey>SearchProvider1</ScopeKey> <ScopeUrl>http://www.google.de/search?q={searchTerms}</ScopeUrl> <FaviconURL>http://www.google.de/favicon.ico</FaviconURL> </Scope> </SearchScopes> <FavoritesList> <FavoriteItem wcm:action="add"> <FavID>1</FavID> <FavTitle>Retsch GmbH</FavTitle> <FavURL>http://www.retsch.de</FavURL> </FavoriteItem> </FavoritesList> <FeedList> <FeedItem wcm:action="add"> <FeedKey>Feed1</FeedKey> <FeedTitle>Tagesschau</FeedTitle> <FeedURL>http://www.tagesschau.de/xml/rss2</FeedURL> </FeedItem> </FeedList> </component> <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <SystemLocale>de-DE</SystemLocale> <UILanguage>de-DE</UILanguage> <UserLocale>de-DE</UserLocale> <InputLocale>0407:00000407</InputLocale> </component> <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <Identification> <JoinWorkgroup>ARBEITSGRUPPE</JoinWorkgroup> <Credentials> <Domain>haan.local</Domain> <Password>password</Password> <Username>Administrator</Username> </Credentials> <JoinDomain>haan.local</JoinDomain> </Identification> </component> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <ComputerName>*</ComputerName> <TimeZone>W. Europe Standard Time</TimeZone> </component> </settings> <settings pass="windowsPE"> <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <UserLocale>de-DE</UserLocale> <UILanguage>de-DE</UILanguage> <SystemLocale>de-DE</SystemLocale> <InputLocale>0407:00000407</InputLocale> </component> <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <ImageInstall> <OSImage> <InstallFrom> <MetaData wcm:action="add"> <Key>/IMAGE/INDEX</Key> <Value>1</Value> </MetaData> </InstallFrom> </OSImage> </ImageInstall> <Display> <ColorDepth>32</ColorDepth> <HorizontalResolution>1024</HorizontalResolution> <VerticalResolution>768</VerticalResolution> <RefreshRate>60</RefreshRate> </Display> <UserData> <ProductKey> <Key>HYF8J-CVRMY-CM74G-RPHKF-PW487</Key> </ProductKey> <AcceptEula>true</AcceptEula> <Organization>Verder Group</Organization> <FullName>Retsch GmbH</FullName> </UserData> </component> </settings> <settings pass="oobeSystem"> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <FirstLogonCommands> <SynchronousCommand wcm:action="add"> <Order>1</Order> <CommandLine>%Systemdrive%\Install\WPI.cmd</CommandLine> </SynchronousCommand> </FirstLogonCommands> <OOBE> <HideEULAPage>true</HideEULAPage> <ProtectYourPC>3</ProtectYourPC> <NetworkLocation>Work</NetworkLocation> </OOBE> <UserAccounts> <AdministratorPassword> <Value>password</Value> <PlainText>true</PlainText> </AdministratorPassword> <LocalAccounts> <LocalAccount wcm:action="add"> <Password> <Value>password</Value> <PlainText>true</PlainText> </Password> <Name>retsch</Name> <Group>Administrators</Group> </LocalAccount> </LocalAccounts> </UserAccounts> <AutoLogon> <Password> <Value>password</Value> <PlainText>true</PlainText> </Password> <Enabled>true</Enabled> <LogonCount>2</LogonCount> <Username>Administrator</Username> </AutoLogon> <ShowWindowsLive>false</ShowWindowsLive> </component> </settings> <cpi:offlineImage cpi:source="" xmlns:cpi="urn:schemas-microsoft-com:cpi" /></unattend> Gruß X23

Hi, i've downloaded everything from mcrip, and 2484033 and 2505438 are in the old folder... hmm kb2488113 is nowhere in the updates folder but my win 7 iso doesnt cry for updates after install and windows update check. What have this prerequisites to do with the unattended settings? Greetz X23

to less info for a qualified help!

Agree! (i install it as first one 1. position in list)

Hi, yeah but moving the Apps folder means, grab it out of the iso and save the iso without the folder? Isn't there a managed way? What i mean is an option for installer like dont integrate Apps folder, just prepare it in folder X then i can copy that folder to any other drive, without grabbing the stuff out of the finished iso and so on. I hope it will then also work when the Apps folder contains more stuff then expected. What iam trying to say is, normally the list what to install is hardcoded at the moment i start the process with wintoolkit, afaik it contains the list in the registry. A simple file in the root of the Apps folder, like contents.ini or something would be nice! Another present would be profiles, means a dropdown box where i can select for example: Work - Company XY - Computer Work - Company XY - Notebook Should be easy to realize, lego just add a dropdown menu, then in sfx i can set a option for any apps (like a matrix that i can check) to which profile that app belongs to. Then a menu option where i can define profile names. Then later when the installer is triggered user can choose from profiles that check the right apps for you or can decide to choose manually. So i can install different system with the same base but different apps without choosing the right ones out of a list from 20-100 apps. Another idea is to input network drive credentials directly into wintoolkit so it can mount a net ressource to locate the apps folder automatically. (Maybe realised as program option) Greetz X23

Hi, how can i get sure to just install gdr? MCRip offers both, where is a source for all gdr since today? Greetz X23

Hi, i must been blind, with my last run above the list i didn't meantioned it. Strange, i also use it the same way but with installer i install greenshot. After the installation of greenshot it opens a webpage... with that it opens a second page with the firstrunwizard. Does the setting only work with firstload? Maybe not in stage the wintoolkit installer run on? If anyone else installing greenshot with the outofthebox installer, i use the following to exit ie after greenshot opened it: taskkill /F /IM iexplore.exe Greetz X23

Hi, is this here working for someone with ie9 in a autounattended.xml? Greetz X23

Hi, seems my question was good Greetz X23

Hi, thank you for the link but i cannot clear it totally. GDR means everything windows update website offers? and the rest are special hotfixes for problems but also including the security fixes, but to get those updates i have to visit special ms links or have to order special hotfixes from ms? MCRip offers both? Damn iam not sure which update base to use to integrate argh Greetz X23

Hi, afaik ie language packs cannot be integrated, i always install mine as sfx and that works well. just add the language pack file as installer/sfx. Greetz X23

Hi, if wintoolkit scan on every drive with a letter and additionally on x:\sources\apps how can i define in wintoolkit to not integrate all the installers to the iso root? The reason to not integrate Apps into the iso is space so how to do it? What i want is having the installer but having the apps physically on a net drive like x:\sources\apps but wintoolkit always integrates the apps into the iso. And howto mount the remote resource? making a batch with the net use and trigger it locally (integrated to iso) with the installer? iam confused... Hints please. Greetz X23

Hi, i can agree, i have sad2 integrated with setupcomplete.cmd and sad2 triggers after installer! Greetz X23