jo72

My last post for this topic. Done a lot attampts to port the multibootUSB-Flash to ISO eg.DVD.(burning&emulating-beware wich QEMU version you use!). Many candidates are on the start-rmprepusb is the winner. Conclusion:rmprepusb has all on bord we need for building and porting. BUT... The sticking point is once again the grub4dos menu.list witch has to be modified by txt.edit for an optical media (primary the ISO sourcepaths/XP help :doh: drivers for example FiraDisk/and layout). To cut a long story short...I surrender! Not willing to spend more time in the ISO-DVD version because it's out of date for me. Done my best-sorry again Jaanvi. For those who want go deeper in matter, the Link's that was very helpfull to build a professional workbasic. http://www.rmprepusb.com/tutorials/grub4dos http://www.rmprepusb.com/tutorials/firawiniso http://www.911cd.net/forums/index.php?showtopic=18045 http://www.msfn.org/board/topic/95537-multiboot-vista-xp-and-other-oses-with-grub4dos-menu/ http://diddy.boot-land.net/grub4dos/files/boot.htm http://xpt.sourceforge.net/techdocs/nix/disk/btmk/btmk10-WindowsSpecificMultiBootingUSB/ar01s03.html Hot for porting:http://www.rmprepusb.com/tutorials/makegrub4dosiso Godspeed!... ps:Maybe you should spend a little time to work on your good manners Jaanvi how you perform your re-posts. Primary intention was to build an satisfying result to your question. So think twice ma dear... :doh: no offence! Bye...

Just let You know. Finally complete the Multiboot USB-Flash 16GB Project with WinSetupFromUSB. Baby it works...yippie ya yeah. Going to transport it on a optical Media if it's possible. Will report...to be continued. Who's curious my 2 GRUB4DOS Setup's and Details in It attached... (Sorry Uploading multipl.FAILED-So in pure txt.). menu.lst color green/black black/light-blue timeout 240 #graphicsmode 0x6A graphicsmode -1 640 480:800 24:32 || graphicsmode -1 ## Menu AutoNumber write 0x8274 0x2001 #graphicsmode -1 800:640 -1 24:32 || graphicsmode -1 #font /unifont.hex.gz #clear mappings and set root in case we return from bootmgr map --unmap=0:0xff map --unhook map --rehook ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nul ls /default > nul && default /default title BOOTE von Erster Interner FESTPLATTE\nBootet falls vorhanden das installierte System auf HD 0/1. map --unhook map --unmap=0:0xff && map --rehook savedefault ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat /shifthd.bat if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lst pause --wait=1 Booting MBR on hd0 ... chainloader (hd0)+1 title WINDOWS 7 und 8.1 (PREAKTIVIERT INSTALLIEREN)\nAuswahl im folgenden Untermenue map --unhook map --unmap=0:0xff && map --rehook savedefault +1 ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat /shifthd.bat if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lst root (hd%RDSK%,0) chainloader /BOOTMGR title WINDOWS XP PRO SP3 (PREAKTIVIERT INSTALLIEREN)\nAuswahl im folgenden Untermenue map --unmap=0:0xff map --unhook && map --rehook savedefault ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag configfile /winsetup.lst title WindowsPE.3.1x64 MRR.CD+WinExplorer map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/00.WindowsPE.3.1x64_____________MRR.CD+WinExplorer.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title PC.Welt-Notfall-AIO.KNOPPIX 6.7 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/01.PC.Welt-Notfall-AIO.KNOPPIX__6.7.ISO ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title ULTIMATE-BootCD 5.2.5 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/02.ULTIMATE-BootCD______________5.2.5.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title PMAGIC 2013.06.15 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/03.PMAGIC_______________________2013.06.15.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title PARAGON-FestPlattenManager 12PRO map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/04.PARAGON-FestPlattenManager___12PRO.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title NT.PasswordReseter 110511 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/05.NT.PasswordReseter___________110511.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title KON-bootCD 2.1 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/06.KON-bootCD___________________2.1.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title MEMtest86 4.3.0b map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/07.MEMtest86____________________4.3.0b.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title HITACHI-DriveFitnessTestx86 4.16b00 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/08.HITACHI-DriveFitnessTestx86__4.16b00.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title AVIRA-LiveCD 12.2012 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/09.AVIRA-LiveCD_________________12.2012.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title BITDEFENDERrescueCD 03.2013 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/10.BITDEFENDERrescueCD__________03.2013.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title GPARTED 0.16.1 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/11.GPARTED______________________0.16.1.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title OSF.Clone 1.0.1008 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/12.OSF.Clone____________________1.0.1008.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) title CLONEZILLA 2013.02.26 map --unmap=0:0xff map --unhook && map --rehook cat --hex --locate=PoLPu@ (md)0x3D0+0x130 > nul && echo Cannot continue if PLoP is active, please start this entry without loading PLoP first && echo && pause Press any key to return to the main menu && configfile /menu.lst set /a dev=*0x8280&0xff root (%dev%,0) set ISO=/ISO/13.CLONEZILLA___________________2013.02.26.iso ls %ISO% > nul || find --set-root --devices=hf /usbdrive.tag|| echo Error! Could not find usbdrive.tag && echo && pause Press any key to return to the main menu && configfile /menu.lst ls %ISO% > nul || find --set-root --devices=hf %ISO% || echo Error! Could not find %ISO% && echo && pause Press any key to return to the main menu && configfile /menu.lst map %ISO% (0xff) || map --heads=0 --sectors-per-track=0 %ISO% (0xff) || echo FATAL ERROR mapping %ISO%, please check if file is present and defragmented && pause Press any key to return to main menu && configfile /menu.lst #http://reboot.pro/topic/9916-grub4dos-isohybrided/page-2#entry88531 #http://www.rmprepusb.com/tutorials/tails set /a dev=*0x82a0&0xff debug 1 parttype (%dev%,3) | set check= debug off set check=%check:~-5,4% if "%check%"=="0x00" partnew (%dev%,3) 0 0 0 && partnew (%dev%,3) 0x00 %ISO% if not "%check%"=="0x00" echo WARNING: PARTITION TABLE 4 IN BIOS DEVICE %dev% IS ALREADY IN USE! && echo && echo To prevent possible data loss will not continue further && pause && configfile /menu.lst map --hook root (0xff) chainloader (0xff) winsetup.lst color green/black black/light-blue write 0x8274 0x2001 timeout 240 ls /windefault > nul && default /windefault title ...Zurueck zum Hauptmenue ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nul configfile /menu.lst title \n root title 1.OPTION Autodetect und benutze F6 SATA/RAID/SCSI Treiber\nDiese Option benutzen wenn 1.interne HD nicht erkannt wird oder Stop BSOD 0x0000007B angezeigt wird\nAuswaehlen vorm TextModeSetup oder PE1 Start\n!!Im Moment nur 32Bit Unterstuetzung!!\nLINKs (www.chenall.net/) & (www.rmprepusb.com) #http://bbs.wuyou.com/viewthread.php?tid=197550 #http://chenall.net/ #http://www.rmprepusb.com map --unmap=0:0xFF map --unhook && map --rehook ls /DPMS/DPMS.ISO > nul || find --set-root --devices=hf /DPMS/DPMS.ISO map /DPMS/DPMS.ISO (0xfa)|| map --mem /DPMS/DPMS.ISO (0xfa) map --hook root (0xfa) set FIRA=0 /dpms2.g4b 0 ls (0)/txtsetup.oem && map (0) (1) && set DPMS=1 map --unmap=0xfa map --rehook ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag configfile /winsetup.lst title 2.OPTION Autodetect und benutze F6 SATA/RAID/SCSI Treiber+Firadisk Treiber\nDiese Option benutzen wenn obere Funktion nicht Funktioniert\nAuswaehlen vorm TextModeSetup #http://bbs.wuyou.com/viewthread.php?tid=197550 #http://chenall.net/ #http://www.rmprepusb.com map --unmap=0:0xFF map --unhook && map --rehook ls /DPMS/DPMS.ISO > nul || find --set-root --devices=hf /DPMS/DPMS.ISO map /DPMS/DPMS.ISO (0xfa)|| map --mem /DPMS/DPMS.ISO (0xfa) map --hook root (0xfa) set FIRA=0 /dpms2.g4b 0 ls (0)/txtsetup.oem && map (0) (1) map --unmap=0xfa map --rehook ls (0)/txtsetup.oem && set LOADFIRA=1 && set DPMS=1 ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag configfile /winsetup.lst #F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6# #DO NOT REMOVE THESE LINES title \n root title 1.Windows XP Professional SP3-INSTALLIEREN set ISOPATH=/WINSETUP/XPpSP3.ISO if NOT %DPMS%==1 map --unhook if NOT %DPMS%==1 map --unmap=0:0xff && map --rehook savedefault +1 ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat /shifthd.bat root (hd%RDSK%,0) ls %ISOPATH% > nul || find --set-root --devices=h %ISOPATH% map --mem %ISOPATH% (0xff) map --e820cycles=3 map --rehook ls (0xff)/ > nul && root (0xff) ls (0xff)/ > nul || echo Fatal error while creating virtual disk 0xFF... if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /winsetup.lst if not %RDSK%==1 ls (0xff)/I386/TXTSETUP.SIF > nul && cat --locatei=rdisk(1) --replace=rdisk(%RDSK%) (0xff)/I386/TXTSETUP.SIF if not %RDSK%==1 ls (0xff)/AMD64/TXTSETUP.SIF > nul && cat --locatei=rdisk(1) --replace=rdisk(%RDSK%) (0xff)/AMD64/TXTSETUP.SIF if %LOADFIRA%==1 ls (0xff)/I386/TXTSETUP.SIF > nul && cat --locatei=;;FIRA;; --replace=;;FIRA\r\n (0xff)/I386/TXTSETUP.SIF ls /I386/SETUPLDR.BIN > nul && set LDR=/I386/SETUPLDR.BIN chainloader %LDR% pause --wait=1 Launching Setup from (hd%RDSK%,0) boot #we should not get here but just in case of errors above... map --unhook map --unmap=0:0xff && map --rehook title 2.Von der 1 Internen Festplatte-BOOTEN savedefault ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat /shifthd.bat if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lst pause --wait=1 Booting MBR on hd0 ... chainloader (hd0)+1 rootnoverify (hd0) title \n root

Than sorry Jaanvi... Just want to help you. mooms Post 13 January 2014 - 12:08 AM Link XP Powerpacker works to me... You sould hang on mooms Way for build an multi DVD... I go on build an ultimate MultiUSB just for Fun...(Maybe you change your Preferences from DVD to USB-works just a little faster ). So good Luck...and...You know...

Hey Guys! Q:Can't we add the drivers with driverpacks mass storage text mode function ? A:This should work also...append a Gru4Dos"winsetup.lst"+"menu.lst" Sample performed with WinSetupFromUSBv1.3.-Take a Look... WinSetupFromUSBv1.3.-Instal.esd Sources Windows 8.1 x86x64 testet-works 100% on USBflash (DVD?). Rebuild Grub Menu if you like...(see my Samples). So long... winsetup.lst color green/black black/light-bluewrite 0x8274 0x2001timeout 240ls /windefault > nul && default /windefaulttitle ...Zurueck zum Hauptmenuels /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nulconfigfile /menu.lsttitle \nroottitle OPTIONAL Auto-detect and use F6 SATA/RAID/SCSI Driver\nUse if your internal disk is not detected or getting BSOD 0x0000007B\nSelect once before Text mode of Setup or starting PE1\nCurrently 32 bit versions are supported.\nCreated by Chenall (www.chenall.net/) & Modified by Steve Si (www.rmprepusb.com)#http://bbs.wuyou.com/viewthread.php?tid=197550#http://chenall.net/#http://www.rmprepusb.commap --unmap=0:0xFFmap --unhook && map --rehookls /DPMS/DPMS.ISO > nul || find --set-root --devices=hf /DPMS/DPMS.ISOmap /DPMS/DPMS.ISO (0xfa)|| map --mem /DPMS/DPMS.ISO (0xfa)map --hookroot (0xfa)set FIRA=0/dpms2.g4b 0ls (0)/txtsetup.oem && map (0) (1) && set DPMS=1map --unmap=0xfamap --rehookls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tagconfigfile /winsetup.lsttitle OPTIONAL Auto-detect and use F6 SATA/RAID/SCSI Driver + Firadisk\nTry this entry if the one above does not work on particular machine\nUse once, before Text mode of Setup#http://bbs.wuyou.com/viewthread.php?tid=197550#http://chenall.net/#http://www.rmprepusb.commap --unmap=0:0xFFmap --unhook && map --rehookls /DPMS/DPMS.ISO > nul || find --set-root --devices=hf /DPMS/DPMS.ISOmap /DPMS/DPMS.ISO (0xfa)|| map --mem /DPMS/DPMS.ISO (0xfa)map --hookroot (0xfa)set FIRA=0/dpms2.g4b 0ls (0)/txtsetup.oem && map (0) (1)map --unmap=0xfamap --rehookls (0)/txtsetup.oem && set LOADFIRA=1 && set DPMS=1ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tagconfigfile /winsetup.lst#F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6##F6# #DO NOT REMOVE THESE LINEStitle \nroottitle 1 Windows XP Professional SP3 INSTALLIERENset ISOPATH=/WINSETUP/XPpSP3.ISOif NOT %DPMS%==1 map --unhookif NOT %DPMS%==1 map --unmap=0:0xff && map --rehooksavedefault +1ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batroot (hd%RDSK%,0)ls %ISOPATH% > nul || find --set-root --devices=h %ISOPATH%map --mem %ISOPATH% (0xff)map --e820cycles=3map --rehookls (0xff)/ > nul && root (0xff)ls (0xff)/ > nul || echo Fatal error while creating virtual disk 0xFF...if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /winsetup.lstif not %RDSK%==1 ls (0xff)/I386/TXTSETUP.SIF > nul && cat --locatei=rdisk(1) --replace=rdisk(%RDSK%) (0xff)/I386/TXTSETUP.SIFif not %RDSK%==1 ls (0xff)/AMD64/TXTSETUP.SIF > nul && cat --locatei=rdisk(1) --replace=rdisk(%RDSK%) (0xff)/AMD64/TXTSETUP.SIFif %LOADFIRA%==1 ls (0xff)/I386/TXTSETUP.SIF > nul && cat --locatei=;;FIRA;; --replace=;;FIRA\r\n (0xff)/I386/TXTSETUP.SIFls /I386/SETUPLDR.BIN > nul && set LDR=/I386/SETUPLDR.BINchainloader %LDR%pause --wait=1 Launching Setup from (hd%RDSK%,0)boot#we should not get here but just in case of errors above...map --unhookmap --unmap=0:0xff && map --rehooktitle 2 Von 1 Internen Festplatte BOOTENsavedefaultls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstpause --wait=1 Booting MBR on hd0 ...chainloader (hd0)+1rootnoverify (hd0)title \nroot menu.lst color green/black black/light-bluetimeout 240#graphicsmode 0x6Agraphicsmode -1 640 480:800 24:32 || graphicsmode -1## Menu AutoNumberwrite 0x8274 0x2001#graphicsmode -1 800:640 -1 24:32 || graphicsmode -1#font /unifont.hex.gz#clear mappings and set root in case we return from bootmgrmap --unmap=0:0xffmap --unhookmap --rehookls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nulls /default > nul && default /defaulttitle WINDOWS XP PRO SP3 (PREAKTIVERT INSTALLIEREN)\nAuswahl im folgenden Untermenuemap --unmap=0:0xffmap --unhook && map --rehooksavedefaultls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tagconfigfile /winsetup.lsttitle WINDOWS Vista/7/8/8.1 (PREAKTIVERT INSTALLIEREN)\nAuswahl im folgenden Untermenuemap --unhookmap --unmap=0:0xff && map --rehooksavedefault +1ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstroot (hd%RDSK%,0)chainloader /BOOTMGRtitle WINDOWS (BOOTE von Interner FESTPLATTE)\nBootet falls vorhanden das installierte System auf HD 0/1.map --unhookmap --unmap=0:0xff && map --rehooksavedefaultls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstpause --wait=1 Booting MBR on hd0 ...chainloader (hd0)+1title Windows NT6 (Vista/7 and above) Setupmap --unhookmap --unmap=0:0xff && map --rehooksavedefault +1ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstroot (hd%RDSK%,0)chainloader /BOOTMGRtitle Second part/continue NT6 Setup (Boot first internal disk)map --unhookmap --unmap=0:0xff && map --rehooksavedefaultls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat/shifthd.batif "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lstpause --wait=1 Booting MBR on hd0 ...chainloader (hd0)+1

Hey Guys! I can confirm mooms post for rmprepusb.This tool is State of the Art for USB.Multiworkout. rmprepusb performs all of this Steps (and many more),but not realy userfriendly for me. It is allso included in WinSetupFromUSBv1.3. WARNING! easy2Boot is a real good Tool,but has Problems with more than 1 Windows Source.(self testet). Allover the named Tools use Grub4Dos or SysLinux as Bootloader. The tricky Part of preparing an Multiboot (DVD or USBflash) is to integrate the Drivers (such as XP need) in the Bootsection,and form the Grubbootlist most times manual. (I've used lot of Time and Training to get the same Result as WinSetupFromUSB performs). Will test the new Versions...and report... Have a nice Day...

Re.take a Look ad... WinSetupFromUSBv1.3 x86x64 out now. http://www.winsetupfromusb.com/downloads/ http://www.winsetupfromusb.com/supported-sources/ I recommend the exe.download-7zip is defect. (Instal.esd is now supported)!!!-not testet by me so far... :g: .

WinSetupFromUSBv1.2 x86x64...is the real Tool-works 100%(Tested)... (Note!! VISTA+up Sources must have Install.wim and NO Install.esd in it-XP has do be unpacked Source)