Error message after the first reboot of the windows installer

feeliks83 · August 12, 2012

zuerst in Deutsch weil, wie es ausschaut, du aus dem deutschen Sprachraum kommst .
1) Warum willst du alles mögliche an Patches und Update integrieren? Mit der .ISO X17-59885 (mit SP1) und den Update-Pack von Dr. Windows geht es problemlos! Das Patch KB976902 ist für Win7 OHNE SP1 (siehe hier)
2) In der .INI sind alle mögliche Treiber drin, für Vista und Win7, für ATI/AMD und NVIDIA, für Audio-Xonar und Audio-Realtek, und und und.
Ich integriere, außer das Pack von Dr.Windows, ein paar Updates für .NET-Framework und, vor allem aber nur die Treiber für meine Hardware; nach der Installation, starte ich Windows-Update und es sind 3 Updates verfügbar, die man nicht integrieren braucht, weil sie so oder so von Windows-Update nochmal nachgeladen werden.
Wenn du willst, kann ich dir meine .INI-Datei zur Verfügung stellen.

Ja ich bin deutscher..so geht das natürlich einfacher

1) Ich wollte halt alle updates integriert haben..das das so problematisch werden würde hatte ich nicht gedacht..Kam auch auf die idee mit dem Update Pack allerdings habe ich das WinFuture_7SP1_x64_UpdatePack_2.15_Juli_2012-Vollversion.exe gewählt weil ich Dr Windows bis gerade nicht kannte

Das Update Pack füge ich dann als silent installer ein oder? und über die 2 Windows Updates habe ich mich dann auch erkundigt ^^

2) meinst du in der oem0.inf?

Ich wollte mir eigentlich einen USB Stick machen der Treiber und Programme integriert hat sowie ein paar Veränderungen an den Services bzw Tweaks vornehmen.

Zu Win2k zeiten bzw unter Windows XP hatte ich mir auch umfangreiche Unattented CD´s gemacht..unter Vista bzw. Win7 allerdings nicht...muss doch möglich sein das ich das zum laufen bekomme

Letzter Stand war jetzt das ich alles unverändert gelassen habe ausser das ich einen Treiber hinzugefügt habe mit dem Ergebnis das die gleiche fehlermeldung kommt..

Erstelle gerade nochmal eine .iso in der dann nur ein tweak verändert wurde..

Integrate 'HDC' Drivers (boot.wim)

Integrate 'SCSIADAPTER' Drivers (boot.wim)

Integrate 'SYSTEM' Drivers (boot.wim)

Integrate 'USB' Drivers (boot.wim)

und "rebuild image"

hab ich mal zum testen rausgenommen

Legolash konnte ja auch mit allen Tweaks bzw Services eine lauffähige Version erstellen..seltsam..

Wenn du willst, kann ich dir meine .INI-Datei zur Verfügung stellen.

Danke für das Angebot das würde ich annehmen

Yes I´m a german so this is of course easier

1) I wanted to have all updates integrated ..I didn´texpect that it would be so tricky...

Had the same idea with update packages but I didn´t know dr. windows before so I choose

WinFuture_7SP1_x64_UpdatePack_2.15_Juli_2012-Vollversion.exe

I have to integrate the update pack as a silent install or? and I informed me about the 2 windows updates

2) Do you mean the oem0.inf?

I wanted to create a usb stick within some programs and updates + changed services and tweaks

In the time of Win2k and Windows XP I also created extensive Unattented CD's . Under Vista or Win7 not yet ... must be possible for me to create this

Last .iso I created was untouched with the exception of one driver

I have added a driver with the same result I get the same error

Create again one .iso where I changed just one tweak..nothing else

Integrate 'HDC' Drivers (boot.wim)

Integrate 'SCSIADAPTER' Drivers (boot.wim)

Integrate 'SYSTEM' Drivers (boot.wim)

Integrate 'USB' Drivers (boot.wim)

and "rebuild image"

I did uncheck to test it

Legolash was also able to create a version within all tweaks or services..strangely

#update

also with just one tweak it didn´t work..um..well..

Wenn du willst, kann ich dir meine .INI-Datei zur Verfügung stellen.
If you want I can give you my preset-file, no problem.

Thanks for the tender I would accept this

Sorry for writing just german..didn´t sleep much ^^

Edited August 12, 2012 by feeliks83

Legolash2o · August 12, 2012

English?

feeliks83 · August 12, 2012

xD .. This .iso I created now is without any changes except tweaked services

bphlpt · August 12, 2012

Sounds like you're doing something basic wrong. Can you try the absolute minimum changes possible from the straight-from-MS-ISO and see if you can bet any build at all to work? Ideally, you should list EXACTLY what you do, even better would be a screen capture video.

Cheers and Regards

Thiersee · August 12, 2012

....
1) Ich wollte halt alle updates integriert haben..das das so problematisch werden würde hatte ich nicht gedacht..Kam auch auf die idee mit dem Update Pack allerdings habe ich das WinFuture_7SP1_x64_UpdatePack_2.15_Juli_2012-Vollversion.exe gewählt weil ich Dr Windows bis gerade nicht kannte
1) I wanted to have all updates integrated ..I didn´texpect that it would be so tricky...

Das hatte ich auch vor am Anfang meiner Arbeit mit WinToolkit, bin aber sehr schnell von der Idee weggekommen, weil es zu viel gibt, das man nicht braucht usw.; mit WinFuture-Update Pack bin ich irgendwie nicht zurecht gekommen.

My intention too at the beginning with WinToolkit and Win7, but I did leave this idea because there is a lot of thing I don't need and I didn't exactly what I have to do...

With WinFuture Update Pack I had some problems.

Das Update Pack füge ich dann als silent installer ein oder?
I have to integrate the update pack as a silent install or? and I informed me about the 2 windows updates

Nein, ich entpacke ihn und schmeiße ein paar Sachen raus die keinen Sinn haben (hatten) und laße die einzelne Updates integrieren.

No, I extract it and eliminate a couple of patches, that not make sense to integrate and let WTK integrate the single patches.

2) meinst du in der oem0.inf?
2) Do you mean the oem0.inf?

Nein, in deinem Post #6; die oem0.inf und die oem1.inf werden von WinToolkit bei der Integration hinzugefügt.

No, those in your post #6; oem0.inf and oem1.inf are being added by WinToolkit during integration.

Ich wollte mir eigentlich einen USB Stick machen der Treiber und Programme integriert hat sowie ein paar Veränderungen an den Services bzw Tweaks vornehmen.
I wanted to create a usb stick within some programs and updates + changed services and tweaks

Genauso wie ich, natürlich an meiner HW und Bedürfnisse angepaßt.

Me too, but adapted to my HW and necessity.

Zu Win2k zeiten bzw unter Windows XP hatte ich mir auch umfangreiche Unattented CD´s gemacht..
In the time of Win2k and Windows XP I also created extensive Unattented CD's .

Ich auch.

Me too.

Danke für das Angebot das würde ich annehmen

Ist angehängt.

Ich weiß nicht, welche Grafik du hast, aber paß auf: WinToolkit kann nicht mit gepackten Treiber umgehen (z.B. AMD).

I don't know which grafik card you have, but be careful: WinToolkit can't handle compressed driver such AMD.

And last but not least:

ich verwende immer eine "jungfreuliche" (naja, halt ohne ei.cfg) ISO für jeden Test und installiere nicht in einer VM zum Testen, sondern auf einere eSATA-Platte; eine AutoUnattend.xml verwende ich auch.

I use ALWAYS a new ISO (without ei.cfg) for my tests and do not install in a VM to test, I install on an external eSATA HD with AutoUnattend.xml.

Wenn du Fragen über Einträge in der .INI, frage einfach.

If you have questions on single topics in my .INI, feel free to ask.

Regards

P.S.: Wofür verwendest du Daemon Tools Lite? Zum ISO-Mounten? m.E. ist VirtualCloneDrive besser.

What are you using DaemonTools Lite for? To Mount ISO? My opinion: VirtualCloneDrive is better.

Edited August 12, 2012 by Thiersee

feeliks83 · August 12, 2012

Sounds like you're doing something basic wrong. Can you try the absolute minimum changes possible from the straight-from-MS-ISO and see if you can bet any build at all to work? Ideally, you should list EXACTLY what you do, even better would be a screen capture video.
Cheers and Regards

Yes it seems like I do something basicly wrong..I made another version..with the Win 7 prof 64bit Media Refresh.iso and just black vipers tweaked services .. I also made a couple of screenshots

http://www.abload.de...enshotw4lg2.jpg

http://www.abload.de...nshot264x62.jpg

http://www.abload.de...nshot347amb.jpg

http://www.abload.de...nshot47mlh3.jpg

http://www.abload.de...nshot5shz37.jpg

http://www.abload.de...nshot6owa0w.jpg

http://www.abload.de...nshot7l3btu.jpg

http://www.abload.de...nshot85zlp8.jpg

http://www.abload.de...nshot907xij.jpg

http://www.abload.de...shot102ol0k.jpg

http://www.abload.de...shot11l6aol.jpg

http://www.abload.de...shot12eclhx.jpg

http://www.abload.de...shot1318z5e.jpg

http://www.abload.de...shot14c4bw1.jpg

um, well..it work´s .. what I did different was I removed the ei.cfg + I didn´t created a .iso file .. just copied the files to the USB stick manually

Now I´ll integrate drivers and silents hope it works.. ^^

No, I extract it and eliminate a couple of patches, that not make sense to integrate and let WTK integrate the single patches.

Ok done

Me too, but adapted to my HW and necessity.

I inegrated now all drivers but my wlan wasn´t found on my laptop even I installed them..

Is there a way to see what´s actually installed inside the install.wim? Drivers, updates silent installer etc.. to be sure everything went fine

I don't know which grafik card you have, but be careful: WinToolkit can't handle compressed driver such AMD.

I have a Nvidia..good to know ^^

I use ALWAYS a new ISO (without ei.cfg) for my tests and do not install in a VM to test, I install on an external eSATA HD with AutoUnattend.xml.

I used before also a new ISO..I removed now ei.cfg and installed it on my laptop because I don´t have an external HDD..I created a AutoUnattend.xml

What are you using DaemonTools Lite for? To Mount ISO? My opinion: VirtualCloneDrive is better.

Yes I used it for mounting..I´ll check VirtualCloneDrive

Edited August 13, 2012 by feeliks83

feeliks83 · August 13, 2012

Now everything is integrated but the silent installers aren´t installed after the installation of windows even wlan on the laptop isn´t found and when I look for the installed windows updates I don´t see them..

The unattended I created does work

Is there a way to see what´s integrated in the install.wim? Drivers updates silents etc..

I forgot..the Installation did stuck at the point :

das festlegen der einstellungen wird abgeschlossen

windows is finalizing your settings

So I just restarted the laptop and later also my computer and windows finished the installation

maybe that´s the reason for the missing drivers updates and silent installs

Edited August 13, 2012 by feeliks83

Thiersee · August 13, 2012

.... when I look for the installed windows updates I don´t see them..
....
Is there a way to see what´s integrated in the install.wim? Drivers updates silents etc..

My way is to call windows-update; if there is nothing to do...

Thiersee

feeliks83 · August 13, 2012

The windows update? I meant how I´m able to see what´s integrated in the /source/install.wim

after the integration with AIO integrator I see it in the TAB "integrated" but when I add something new to the AIO integrator I don´t see my old changes...like added drivers changed services and tweaks as also my silent installs.. when I used RT7lite I was able to see what was changed on the disk

Edited August 13, 2012 by feeliks83

Thiersee · August 13, 2012

The windows update? I meant how I´m able to see what´s integrated in the /source/install.wim ...

OK, I tought you mean the patches.

feeliks83 · August 13, 2012

I have some mounting errors -.-

http://www.mediafire.com/view/?u3s8h9ai6n8a552

http://www.mediafire.com/view/?ivvvnzo3w6z392h

Edited August 13, 2012 by feeliks83

feeliks83 · August 13, 2012

:please:

Edited August 13, 2012 by feeliks83

Thiersee · August 13, 2012

My questions and doubt from Post #23 are the same!

I think you try to integrate too much at the same time and for HW you can't have in a single computer!

Please, attach such long files not as "code" but as file, it's better to scroll and read.

Tnx.

Thiersee

feeliks83 · August 13, 2012

Yeah I have to make it smaller..It was easier to use all files ^^

Yes your right I´ve forgot to upload them

The problem now is the folder C:\WinToolkit\Mount is still there after integration and not deleteable..I tried to unmount with DISM command but DISM do not find any mounts

The error began when Win toolkit crashed..

tried Lockhunter and Unlocker to delete the directory..Lockhunter didn´t do the job and unlocker does not start

Thiersee · August 13, 2012

The Mount-Folder will be automatically deleted by exiting WinToolkit.

If WinToolkit crashes a corrupted image remains in the mount-folder: you must unmount/discard the corrupted image.

Thiersee

feeliks83 · August 13, 2012

It was there after exiting..so decided to umnount/discard the image because of another crash it didn´t work to discard..after that the folder was still there but wintoolkit didn´t recognize the mount

I used now another directory for wintoolkit to prefent the error of the .txt hopefully.. but I still have the problem how to delete ^^

Exception:

Tool Name: WIM Manager (1.4.0.65)

Image Name: Windows 7 Professional

Argument: /Unmount "C:\Test\Mount" /commit

WIM File: F:\Downloads\Wintoolkit\Win7Professionalx64SP1GermanMediaRefresh\SOURCES\install.wim

Mount Logging: True

Drive Type: Fixed

Free Space: 774.25 GB

IsReady: True

File Exists: True

Directory Exists: True

Files:

Directories: *C:\Test\Mount\$Recycle.Bin *C:\Test\Mount\Documents and Settings *C:\Test\Mount\PerfLogs *C:\Test\Mount\Program Files *C:\Test\Mount\Program Files (x86) *C:\Test\Mount\ProgramData *C:\Test\Mount\Users *C:\Test\Mount\Windows

Setting taskbar Progress

Setting taskbar Colour

Dumping Registry

Detecting cause of error #1

Detecting cause of error #2

Detecting cause of error #3

Detecting cause of error #4

ImageX Tool for Windows

Version: 6.1.7601.21716

Committing: [C:\Test\Mount]...

Unmount Error: Changes to the Image could not be commited.

More Info:

Der Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen

Prozess verwendet wird.

The process cannot access the file because it is being used by another process.

Fixed

C:\

109.98 GB

I found this solution..

http://www.microsoft...5084/en-us?fr=1

Edited August 15, 2012 by feeliks83

feeliks83 · August 15, 2012

The solution didn´t work really

Tryed also to dismount via the dism.exe but it didn´t work..got some errors etc..

So I re-installed windows and made a single partition for wintoolkit the iso and mount files..

I don´t get any of the errors now..everything went fine..the mount folder is away as it should be

Test now windows on an external drive

Thanks for all the help so far )

feeliks83 · August 23, 2012

:doh:

I know now how the error message came from "windows setup could not configure windows to run on this computer's hardware"

I forgot to write that I used Yumi for my USB http://www.pendrivel...ot-usb-creator/

Known Issues:

* When installing Windows 8, 7, or Vista from USB, you must unplug the USB device before the first restart, otherwise you will receive an error stating:

"windows setup could not configure windows to run on this computer's hardware" :doh:

The solution is to unplug the USB before the first reboot (when Windows count down the restart I did unplug it)

You can replug the USB when there´s the message Installation will be finished

http://www.abload.de...llatioamurn.jpg

Then the silent installers will finish correctly

But this solution I don´t like really because I want an unattended installation..

Does anyone have a idea how to solve it else? :g:

It seems like when windows is detecting the grub loader the message comes becuase that´s the only difference for my opinion..Yumi just copies the installation files to the usb..same directorys :g:

I thought about using another bootloader..is it possible to create a multiboot USB with the windows bootloader? or is the windows bootloader able to boot .iso files?

Edited August 23, 2012 by feeliks83

Thiersee · August 23, 2012

....
But this solution I don´t like really because I want an unattended installation..
Does anyone have a idea how to solve it else? :g:
It seems like when windows is detecting the grub loader the message comes becuase that´s the only difference for my opinion..Yumi just copies the installation files to the usb..same directorys :g:
I thought about using another bootloader..is it possible to create a multiboot USB with the windows bootloader? or is the windows bootloader able to boot .iso files?

I use this tool (sorry, the description is only in german, but the tool is in english too ) to make a multiboot USB and it works without any "unplug"; here is another description (sorry, only in german) for a previous version of the same tool.

The only thing you have to do is to set the HDD at the first place and the multiboot-USB at the second in the boot-sequence; on starting install you must choose USB in the boot-menu.

Regards, Thiersee

feeliks83 · August 23, 2012

Thank you Thiersee

I´ll test it

Edited August 26, 2012 by feeliks83

feeliks83 · August 26, 2012

I checked it out

The most of my wanted .iso or copied files are working (I´m using a usb 3.0 NTFS formated stick)

Here´s the complete list

ubuntu-12.04-desktop-amd64.iso #working

backbox-2.05-amd64 #working

BT5R3-GNOME-64.iso #working

clonezilla-live-20120620-precise.iso #working

gparted-live-0.13.1-2.iso #working

Hiren's.BootCD.15.1.GR.Keyboard.iso #working

kav_rescue_10.iso #working now! -> I created a other usb stick with the help of the Utility to record Kaspersky Rescue Disk 10 to USB devices looked for the entrys and changed them a little.

ocz-tools-3.20.4.iso # working

trinity-rescue-kit.3.4-build-372.iso #not working -> manually enter the device on which TRK can be found..If I enter the device there isn´t found anything

ubcd511.iso #working

Here´s my menu.lst


color black/cyan yellow/cyan
timeout 10
default /default
#graphicsmode 0x6A
graphicsmode -1 640 480:800 24:32 || graphicsmode -1
## Menu AutoNumber
write 0x8274 0x2001
#graphicsmode -1 800:640 -1 24:32 || graphicsmode -1
#font /unifont.hex.gz



title Installiere Windows 7
map --unmap=0:0xff
map --unhook && map --rehook
root (hd0,0)
ls /bootmgr > nul || find --set-root --devices=hf /bootmgr > nul
chainloader /bootmgr
savedefault +2
title Installiere Windows 7 DEBUG
map --unhook
map --unmap=0:0xff && map --rehook
savedefault +1
ls /usbdrive.tag > nul || find --set-root --devices=hf /usbdrive.tag > nul
configfile /vistastp.lst
title Nach Neustart Boot erste Festplatte falls der USB Stick gebootet wurde
map --unhook
map --unmap=0:0xff && map --rehook
savedefault
ls /shifthd.bat > nul || find --set-root --devices=hf /shifthd.bat
/shifthd.bat
if "%RDSK%"=="" pause Fatal error while swaping hard disk order, cannot continue! && configfile /menu.lst
pause --wait=3 Booting MBR on hd0 ...
chainloader (hd0)+1
title - Linux Versionen
root

title Ubuntu 12.04 without installing
background /multiboot/ubuntu1204/isolinux/splash.png
kernel /ISO/Ubuntu12.04/casper/vmlinuz append cdrom-detect/try-usb=true noprompt boot=casper floppy.allowed_drive_mask=0 ignore_uuid live-media-path=/ISO/Ubuntu12.04/casper/
initrd /ISO/Ubuntu12.04/casper/initrd.lz

title Boot Back Box 2.0.5 (Penetration Testing)
find --set-root /ISO/backbox-2.05-amd64.iso
map /ISO/backbox-2.05-amd64.iso (hd32)
map --hook
chainloader (hd32)
kernel /ISO/backbox-2.05/casper/vmlinuz file=/preseed/backbox.seed boot=casper iso-scan/filename=/ISO/backbox-2.05-amd64.iso quiet splash --
initrd /ISO/backbox-2.05/casper/initrd.gz

title Backtrack 5 RC3 (Penetration Testing)
kernel /ISO/BT5R3/casper/vmlinuz file=/ISO/BT5R3/preseed/custom.seed live-media-path=/ISO/BT5R3/casper boot=casper locale=de_DE.UTF-8 keyb=de textonly noprompt vga=791 i915.modeset=1 --
initrd /ISO/BT5R3/casper/initrd.gz
title - Tools
root


title CloneZilla to backup or restore your hard drive.
kernel /live/vmlinuz boot=live hostname=maverick config quiet noswap nolocales edd=on nomodeset ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_keymap="" ocs_live_batch="no" ocs_lang="" video=uvesafb:mode_option=1024x768-32 ip=frommedia nosplash
initrd /live/initrd.img

title gparted live
find --set-root /ISO/gparted-live-0.13.1-2.iso
map /ISO/gparted-live-0.13.1-2.iso (0xff) || map --mem /ISO/gparted-live-0.13.1-2.iso (0xff)
map --hook
root (0xff)
kernel /live/vmlinuz boot=live config union=aufs noswap noprompt vga=788 ip=frommedia findiso=/ISO/gparted-live-0.13.1-2.iso toram=filesystem.squashfs
initrd /live/initrd.img

title Hirens Boot CD
find --set-root /ISO/HBCD/HBCD/Boot/pmagic/bzImage
kernel /ISO/HBCD/HBCD/Boot/pmagic/bzImage edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 vmalloc=256MiB directory=/ISO/HBCD/HBCD/Boot keymap=%lang% %opt%
initrd /ISO/HBCD/HBCD/Boot/pmagic/initramfs

title Kaspersky Rescue-CD
find --set-root --ignore-cd /rescue/rescueusb.iso
map /rescue/rescueusb.iso (0xff) || map --mem /rescue/rescueusb.iso (0xff)
map --hook
chainloader (0xff)
boot

title run ocz-tools-3.20.4.iso
kernel /ISO/ocz/boot/vmlinuz edd=off load_ramdisk=1 prompt_ramdisk=0 rw nomodeset nosshd nobluetooth nosmart numlock=on loglevel=9 max_loop=256 vmalloc=256MiB blacklist=nouveau
initrd /ISO/ocz/boot/core.gz

title Trinity Rescue v3.4
# You must set the drive volume label on the next line
set VOL=MULTIBOOT
configfile /trk/menu.lst

Trinity menu.lst


echo PLEASE CHECK THIS DRIVE'S VOLUME LABEL = %VOL% (or you will get an error!)
debug -1
pause --wait=4
debug on
title 0 : Run Trinity Rescue Kit 3.4 (default mode, with text menu)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 1 : TRK 3.4 in failsafe mode (No menu, VGA, noacpi, noapic)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose acpi=off noapic pci=conf1 vga=1 vollabel=%VOL%
initrd /trk/initrd.trk
title 2 : TRK 3.4 running from RAM (best >= 512mb, 256mb min)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkinmem trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 3 : TRK 3.4 - Run 'mclone' in client mode (!)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 mclone vollabel=%VOL%
initrd /trk/initrd.trk
title 4 : TRK 3.4 in simple VGA mode (debugging of kernel output)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=1 pci=conf1 splash=off trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 5 : TRK 3.4 with Belgian keyboard (use menu for other)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 keyb_be trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 6 : TRK 3.4 - Virus scan all drives (Clamav, non interactive)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 virusscan vollabel=%VOL%
initrd /trk/initrd.trk
title 7 : TRK 3.4 - Try more pcmcia and usb nics (when not detected)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 pcmcia trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 8 : TRK 3.4 - Try more SCSI drivers (when disks not detected)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 scsidrv trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 9 : TRK 3.4 with a secure shell server enabled
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 sshd vollabel=%VOL%
initrd /trk/initrd.trk
title 10: TRK 3.4 - Execute local scripts on harddrive of PC
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 locscr vollabel=%VOL%
initrd /trk/initrd.trk
title 11: TRK 3.4 as bootserver to boot other TRK clients
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkbootnet trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 12: TRK 3.4 - Fileshare all drives as guest, no security
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 smbguest trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 13: TRK 3.4 - Single user mode (no menu)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 runlevel 1 vollabel=%VOL%
initrd /trk/initrd.trk
title 14: TRK 3.4 - Acpi=off, noapic PCI=bios (Alternate boot 1)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose acpi=off noapic pci=bios trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 15: TRK 3.4 - Acpi=off, noapic PCI=any (Alternate boot 2)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose acpi=off noapic trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 16: TRK 3.4 - PCI=conf2 (Alternate boot 3)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf2 trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 17: TRK 3.4 - Verbose startup for debugging (no menu)
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 debugging vollabel=%VOL%
initrd /trk/initrd.trk
title 18: TRK 3.4 - SSH, boot- and guest fileserver, run from RAM
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 sshd trkinmem smbguest trkbootnet trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 19: TRK 3.4 - Run from RAM, run mclone as client
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 trkinmem mclone vollabel=%VOL%
initrd /trk/initrd.trk
title 20: TRK 3.4 with proxyserver support enabled
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 proxy trkmenu vollabel=%VOL%
initrd /trk/initrd.trk
title 21: TRK 3.4 - All devices set to read-only
kernel /trk/kernel.trk ramdisk_size=65536 root=/dev/ram0 vga=788 splash=verbose pci=conf1 allro vollabel=%VOL%
initrd /trk/initrd.trk
title 22: Memory tester: Memtest86+ v1.65
kernel /trk/memtest.x86

Maybe you are using one of the not working ones too and can help me

I get the most working by modifying the menu.lst entrys and trying different ways to reach the goal ^^

Edited August 26, 2012 by feeliks83

Thiersee · August 26, 2012

Sorry, I don't use any of the "not working" ISOs.

I only use: Win7 Installing, XP Installing, PArtedMagic, BartPE/Ghost.

feeliks83 · August 26, 2012

No Problem

But the chance was there...

I think I´ll get the other ones booting too..just need some time

Now everything except trinity rescue disc is working..

I get this error msg..from usb..the CD I created workes fine..

Tryiing to find TRK on your 1 CD-drive(s)
TRK not founs on CD, checking harddisks and USB sticks ...
cat: /etc/trkhd: No such file or directory
Seems we didn't find anything yet. Trying CD-drives once more
Trying to find TRK on your CD-drive(s)
Seems we didn't find the TRK medium
Manually enter the device on which TRK can be found (e.g. sda1):

Edited August 26, 2012 by feeliks83

feeliks83 · August 29, 2012

I solved it by creating another partition on the USB stick

Extracted the whole .ISO on the partition

and boot it with this grub4dos entry

title Trinity Rescue Disc \Mapped and Booted from Partition sdb2
map (hd0,1)+1 (fd0)
map --hook
root (fd0)
chainloader +1
boot

Maybe someone have a tough time with it like me and this helps him

Danke nochmal Thiersee für den tip mit WinSetupFromUSB

Ich habe jetzt mal Windows installiert und alles hat funktioniert wie gewollt

Thanks again Thiersee for the tip with WinSetupFromUSB

I installed windows now and everything worked fine as I wanted

:dancing:

Edit 1:

I renamed the stick to TRK_3-4 I forgot (what didn´t work on the first partition)

Edited August 29, 2012 by feeliks83

Sign In

Error message after the first reboot of the windows installer

Recommended Posts

feeliks83

Legolash2o

feeliks83

bphlpt

Thiersee

feeliks83

feeliks83

Thiersee

feeliks83

Thiersee

feeliks83

feeliks83

Thiersee

feeliks83

Thiersee

feeliks83

feeliks83

feeliks83

Thiersee

feeliks83

feeliks83

Thiersee

feeliks83

feeliks83

Join the conversation

Browse

Activity