local area connection is limited

[Guest]

Hi,

i installed win8 pro, i turn on adsl modem but local area connection is limited always and with yellow

exclamation on task-bar.sometimes it connect to the Internet about 30 second and then yellow

exclamation is revert back. i disabled ipv6 with this command but still dont work.

netsh interface ipv6 6to4 set state disabled

netsh interface teredo set state disabled.

is there anyway to fix this?

this is a ipconfig.all that windows genereted.

Windows IP Configuration   Host Name . . . . . . . . . . . . : hoampc   Primary Dns Suffix  . . . . . . . :    Node Type . . . . . . . . . . . . : Hybrid   IP Routing Enabled. . . . . . . . : No   WINS Proxy Enabled. . . . . . . . : NoPPP adapter Broadband Connection:   Connection-specific DNS Suffix  . :    Description . . . . . . . . . . . : Broadband Connection   Physical Address. . . . . . . . . :    DHCP Enabled. . . . . . . . . . . : No   Autoconfiguration Enabled . . . . : Yes   IPv4 Address. . . . . . . . . . . : 4.199.110.168(Preferred)    Subnet Mask . . . . . . . . . . . : 255.255.255.255   Default Gateway . . . . . . . . . : 0.0.0.0   DNS Servers . . . . . . . . . . . : i removed this                                       4.2.2.1   NetBIOS over Tcpip. . . . . . . . : DisabledEthernet adapter Ethernet:   Connection-specific DNS Suffix  . :    Description . . . . . . . . . . . : Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller   Physical Address. . . . . . . . . : 00-0F-EA-63-7D-B0   DHCP Enabled. . . . . . . . . . . : Yes   Autoconfiguration Enabled . . . . : Yes   IPv4 Address. . . . . . . . . . . : 189.100.30.100(Preferred)    Subnet Mask . . . . . . . . . . . : 255.255.255.0   Lease Obtained. . . . . . . . . . : i removed this   Lease Expires . . . . . . . . . . : i removed this   Default Gateway . . . . . . . . . : 189.100.30.50   DHCP Server . . . . . . . . . . . : 189.100.30.50   DNS Servers . . . . . . . . . . . : 189.100.30.50                                       189.100.30.50   NetBIOS over Tcpip. . . . . . . . : Disabled

route.print.txt

===========================================================================Interface List 20...........................Broadband Connection 12...00 0f ea 63 7d b0 ......Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller  1...........................Software Loopback Interface 1===========================================================================IPv4 Route Table===========================================================================Active Routes:Network Destination        Netmask          Gateway       Interface  Metric          0.0.0.0          0.0.0.0    189.100.30.50   189.100.30.100   4245          0.0.0.0          0.0.0.0         On-link     4.199.110.168     21    4.199.110.168  255.255.255.255         On-link     4.199.110.168    276        127.0.0.0        255.0.0.0         On-link         127.0.0.1   4531        127.0.0.1  255.255.255.255         On-link         127.0.0.1   4531  127.255.255.255  255.255.255.255         On-link         127.0.0.1   4531     189.100.30.0    255.255.255.0         On-link    189.100.30.100   4501   189.100.30.100  255.255.255.255         On-link    189.100.30.100   4501   189.100.30.255  255.255.255.255         On-link    189.100.30.100   4501        224.0.0.0        240.0.0.0         On-link         127.0.0.1   4531        224.0.0.0        240.0.0.0         On-link    189.100.30.100   4501        224.0.0.0        240.0.0.0         On-link     4.199.110.168     21  255.255.255.255  255.255.255.255         On-link         127.0.0.1   4531  255.255.255.255  255.255.255.255         On-link    189.100.30.100   4501  255.255.255.255  255.255.255.255         On-link     4.199.110.168    276===========================================================================Persistent Routes:  NoneIPv6 Route Table===========================================================================Active Routes: If Metric Network Destination      Gateway  1    306 ::1/128                  On-link  1    306 ff00::/8                 On-link===========================================================================Persistent Routes:  None

Edited December 17, 2012 by mona

[sp0iledbrat]

You can't have a Class A IP address, a broadcast subnet and a 0.0.0.0 Gateway at the same time?

 

You need to fix the subnet and enter the gateway IP at the least. Or enable DHCP, which the router should support.

 

Cheers

[Guest]

how do this?

[mirecek1965]

DHCP Enabled. . . . . . . . . . . : No, there must be "Yes". Open Network Center, Change Adapter settings, right click, properties,

Internet Protocol Version 4 (TCP/IPv4, obtain IP address automatically.