Test_14 works fine for me.

over a 100 hotfixes, 15 custom addons, some silent installers, all integrated correctly and works. Thanks Lego!

I think I have all my SFX/Silent installers correct now along with a bunch of other stuff I do, so i will download the latest version and give it a try and report back

Hi

Test 14 worked fine for me, 118 Updates, 7 silent installers and other stuff all fine.

 

THX lego

Thank you for  Excellent Program keep up the Excellent Work 

Edited February 6, 201312 yr by MBrys331

Glad it's all fixed Any other issues with the test version?

Well I said earlier I decided to I would try the latest versions so I wanted to take my previous integrated image that had only updates added and add 3 more that MS update showed but when I tried to add them it just keeps running and running and never completes... all I see is the image below:

 

EDIT: I tried to cancel it and that doesn't seem to work either it hasn't stopped after almost 15 minutes... I guess I will reboot 

Edited February 7, 201312 yr by compstuff

Well I said earlier I decided to I would try the latest versions so I wanted to take my previous integrated image that had only updates added and add 3 more that MS update showed but when I tried to add them it just keeps running and running and never completes... all I see is the image below:

ng.jpg

 

EDIT: I tried to cancel it and that doesn't seem to work either it hasn't stopped after almost 15 minutes... I guess I will reboot 

I noticed you have a "bang" (!) in the path: I would NOT use special characters in the path; I got problems with special (german) characters).

Glad it's all fixed Any other issues with the test version?

 Yep, see post 44 an 47.

 

I think I'll just switch to 64-bit, less probs with it I think.

 Yep, see post 44 an 47.

 

I think I'll just switch to 64-bit, less probs with it I think.

Put KB2533552 manually in the Silent-Installers.

Hmmm that's something I have always done and it never caused any trouble before... I use ! and _ for my two main folders to keep them at the top...  and the integration with v4 worked without any trouble so has this changed between v4 and v15

My mistake, I was still using Test13, with 14 everything works fine now

I was busy with other things today and din't realize that my forced cancel of last nights integration left a mounted image: C:\WinToolkit_Temp\Mount as an additional note I actually fell asleep before ending the "cancel' integration and it ran for almost 4 1/2 hrs before I forced it to end... now I will discard the mounted image with no save and see what happens

Edited February 8, 201312 yr by compstuff

I just used test 4 to integrate the same 3 updates as I mentioned in my earlier post: http://www.wincert.net/forum/topic/10939-warning-14115-test5-experimental/?p=95295 and they completed in 9 min with no problems

Glad it's all fixed Any other issues with the test version?

 

I have tried WinToolkit141-15_Test15.7z and everything went just well for me.

 

source: win7 sp1 x86 enu

*.msu: 105, all of them GDR, already downloaded

*.wim: integration of *.msu's into starter, hb, hp, prof and ultimate

iso creation.

 

RAMDRIVE(/DISK): 2624MB from 4096 installed on laptop,

containing the *.msu's folder, WinToolkit s\w folder, WinToolkit_Mount folder, WinToolkit_Temp folder, WinToolkit_Files folder

 

source on laptop's hdd.

 

I'll try this night with x64 source and i'll report it.

 

Thank you.

hi guys...where can i find the link to this test version???

 

thanks

The link is in Lego's signature.  Latest Builds

 

Cheers and Regards

The link is in Lego's signature.  Latest Builds

 

Cheers and Regards

 

thanks!!!

I have tried WinToolkit141-15_Test15.7z and everything went just well for me.

 

I'll try this night with x64 source and i'll report it.

 

Hi,

i finished the test and everything went just ok.

 

source: win7 sp1 x64 enu

*.msu: 108, all of them GDR, already downloaded

*.wim: integration of *.msu's into hb, hp, prof and ultimate

iso creation.

 

RAMDRIVE(/DISK): 2840MB from 4096 installed on laptop,

containing the *.msu's folder, WinToolkit s\w folder, WinToolkit_Mount folder, WinToolkit_Temp folder, WinToolkit_Files folder

source on laptop's hdd.

 

Happy integration!

Tested the latest build (test15) with updates of this month on Win7 SP1 X86 and X64 (PRO & HP for both)

 

Integration of KB, addons, sfx, and tweaks, everything works, no bugs encountered. Congrats Lego !

Hum, i have talked too fast: IE9 lanpacks are installed on Professional, but not on Home Premium (both X64 & X86).

Any insights ?

I was thinking that the ability to use language pack options was one of the added "features" of Pro and Ultimate, and it wasn't available for Premium and Starter.  Did I not remember that correctly?

 

Cheers and Regards

Maybe, but in this case it is language pack for IE9, not the system, and I think even starter can have IE9 in foreign language.

Anyway, I have just made a new integration with WinToolkit150-1_Test39 and IE9 langpacks are correctly installed, so I can confirm it is a bug with Wintoolkit.

Edited February 15, 201312 yr by mooms

I just tried a brand new integration using Test 15 and I got the same failure... here is my .ini

STEP-1-Updates-02-15-13.ini

EDIT: Using the same .ini with 14.1.14 works just fine

 

Well I said earlier I decided to I would try the latest versions so I wanted to take my previous integrated image that had only updates added and add 3 more that MS update showed but when I tried to add them it just keeps running and running and never completes... all I see is the image below:

ng.jpg

 

EDIT: I tried to cancel it and that doesn't seem to work either it hasn't stopped after almost 15 minutes... I guess I will reboot 

Edited February 15, 201312 yr by compstuff

@compstuff - I had the same problem with test 15.  WinToolKit appeared to stop right at the first update (it did not matter which one it was) and then it just stopped.  I let it set for an hour (multiple times), and it still did not go anywhere.  I had to use the latest stable version to get the integration done.  Stopping the integration also did not happen either.

Thanks... I was beginning to think it was me... plus I'm having one of those days where nothing seems to be working right for me  :dizzy:

@compstuff - I had the same problem with test 15.  WinToolKit appeared to stop right at the first update (it did not matter which one it was) and then it just stopped.  I let it set for an hour (multiple times), and it still did not go anywhere.  I had to use the latest stable version to get the integration done.  Stopping the integration also did not happen either.