Drivers-Install in the boot.wim

[Thiersee]

Hi Liam,

if you are still reading the forum, I have a bug integrating the drivers in the boot.wim:

If you import the drivers directly in WTK/Drivers-TAB (I mean from my drivers-folder) they get a small icon in front of the line: if you go with the mouse on those marked lines you get a info-box with a MD5 and the info, that the driver will be installed in the boot.wim too.

But, and this is a bug in my opinion, if you use a WTK.ini to import all your settings (Drivers and checked boxes under "Options" are listed!) the checked-Boxes under "Options" have no effect and the drivers are not integrated in the boot.wim!

If you remove all the driver from the TAB and reload them importing a driver.ini (Load Drivers in Preset-Manager) then it works: the drivers get this small icons in front of the line (depending on which boxes under Options you checked) and are integrated in the boot.wim too.

Edited October 15, 2017 by Thiersee

[Legolash2o]

This was caused by Options being loaded last in the preset. Fixed