How to enable AHCI on Intel ICH9 under XP

[NIM]

How to enable

AHCI on Intel ICH9 under XP

After some research, we have a working solution to enable ACHI on the ICH9 with appropriate SATA/NCQ drive(s).

For more information about AHCI, we refer to Wikipedia.org:

The Advanced Host Controller Interface (AHCI) is a hardware mechanism that allows software to communicate with Serial ATA (SATA) devices such as host bus adapters which are designed to offer features not offered by Parallel ATA (PATA) controllers besides higher speeds, such as hot-plugging and native command queuing. The specification details a system memory structure for computer hardware vendors in order to transfer data between system memory and the device.

List of needed files and driver packs:

MagicISO

32-bit Floppy Configuration Utility for Intel

[babu]

That's a best post for us less mortals who want to upgrade to sata drives instead of spending a few more thousands on the comp.Thanks again admin for the nice post.

[babu]

I have installed sata drive in my computer.The drivers are not found in the intel site .Requested to prvide link to download drivers.

[Mr_Smartepants]

Yes, the download link in the first post doesn't work.

Here's a link to current drivers for all OS. (select link for "Drivers" or "Utilities, Tools and Examples")

http://downloadcente...2-bit+floppy%22

Make sure you select the correct one.

For current-series boards, the link is here.

http://downloadcente...=18860〈=eng

Edited May 30, 2010 by Mr_Smartepants

[symbios24]

does anyone know where i can find all the latest windows xp post installation drivers for sata/achi/raid/usb3 so i can integrate them-slipstream with nlite? 

Edited July 6, 2014 by symbios24