Alright, I am trying to test my RAM to see if ant are bad. I am running my sys with each one in by them selves. Is that the only way to test them?

I should no this question, being that I went to school for hardware but it's been awhile. If the RAM is bad the sys will not load correct?

And if it does load then the RAM is fine correct and I have nothing to worry about?

Alright, I am trying to test my RAM to see if ant are bad. I am running my sys with each one in by them selves. Is that the only way to test them?

I should no this question, being that I went to school for hardware but it's been awhile. If the RAM is bad the sys will not load correct?

And if it does load then the RAM is fine correct and I have nothing to worry about?

Windows Memory Diagnostic

The Windows Memory Diagnostic tests the Random Access Memory (RAM) on your computer for errors. The diagnostic includes a comprehensive set of memory tests. If you are experiencing problems while running Windows, you can use the diagnostic to determine whether the problems are caused by failing hardware, such as RAM or the memory system of your motherboard. Windows Memory Diagnostic is designed to be easy and fast. On most configurations, you can download the diagnostic, read the documentation, run the test and complete the first test pass in less than 30 minutes.

To run Windows Memory Diagnostic, you must reboot your computer with the disk or CD-ROM on which you installed Windows Memory Diagnostic in the drive. After the reboot, Windows Memory Diagnostic will load and its interface will appear. After loading, the first test pass will begin, using the default standard test suite, and continue until complete, unless Windows Memory Diagnostic is either paused or exited. Once the first test pass is complete, Windows Memory Diagnostic will begin a second test pass using the same settings as before. Windows Memory Diagnostic will continue to run test passes until you exit.

HERE :welcome:

Thanks Cro-Man. I found a EuroSoft PC Check and ran that. It tests everything (CPU, HDD, mem, sys mem, GPU mem etc.)

Also try MemTest and MemTest+

Also try MemTest and MemTest+

Thanks.

MemTest is good. Also memtest86 is good, this way nothing is running but the program, you boot to CD

Good OC'ing tools :evil:

Thanks Sull. I have tried that and everything was fine.

You have Q6600 right ?

GO batch ? OC time for you my friend lol