GieltjE Posted September 6, 2011 Posted September 6, 2011 (edited) is there anyway to integrate my own sets of updates instead of using SoLoR updates?As long as they are windows msu updates you can add them (except for KB2533552).(What's wrong with SoLoR? they got most of the patches). Edited September 6, 2011 by GieltjE Quote
luxemburg Posted September 8, 2011 Posted September 8, 2011 Is or not in the program updating possibility hardlinks as Winsxslite?? Quote
crashfly Posted September 10, 2011 Posted September 10, 2011 Well, I thought W7T had frozen up again. It appeared to have stopped on an update. This is after I left it to run and I went to bed. To that end, this morning it only made it to update 5 out of 278. In the processes of stopping many unneeded services and programs (to get a cleaner process list), W7T began moving again. I do not think it was any of the processes as those were totally unrelated to W7T and what it does. Maybe the OS puts W7T into some kind of "sleep" mode? Is there a way that you can have the computer not go into a power saving mode while W7T is running? Quote
crashfly Posted September 11, 2011 Posted September 11, 2011 (edited) Well ... it took me a couple of round of integrations. I tried removing the "setupcomplete.cmd" and even tried integration a bit differently (IE9 first instead of last). There appears to be an update that gets integrated and wants to change something near the end of the installation. Attached is a screen shot. This screen appears right before the W7T run silent installers section.Edit: Added a better screen shot of the "condition". Edited September 11, 2011 by crashfly Quote
Legolash2o Posted September 13, 2011 Author Posted September 13, 2011 Whoever made that silent installer for .NET 4 should of added the /norestart or equivalent switch. Quote
Legolash2o Posted September 13, 2011 Author Posted September 13, 2011 Made a few changes, quickly went through 140+ error logs and made a few changes/fixes. AIO-Tool will ask if you are sure to cancel when you click the "Cancel" button, also the AIO-Tool default size depends on the size of your screen. Also fixed the "caplock" misspelling above to include the missing 's'.Didn't update the changelog as i can't remember everything that i have change since v46. Quote
GieltjE Posted September 13, 2011 Posted September 13, 2011 Just installed a W7T image, didn't enable "Remove the searchbox" in the internet explorer section, yet is gone. Quote
GieltjE Posted September 13, 2011 Posted September 13, 2011 Did you integrate IE9?Yes, barely use IE, but need to keep it up to date anyway. Quote
Legolash2o Posted September 13, 2011 Author Posted September 13, 2011 IE9 by default doesn't show the search bar. Quote
bphlpt Posted September 13, 2011 Posted September 13, 2011 (edited) Well ... it took me a couple of round of integrations. I tried removing the "setupcomplete.cmd" and even tried integration a bit differently (IE9 first instead of last). There appears to be an update that gets integrated and wants to change something near the end of the installation. Attached is a screen shot. This screen appears right before the W7T run silent installers section.Whoever made that silent installer for .NET 4 should of added the /norestart or equivalent switch.@crashfly - Can you verify whether it is the .NET 4 installer that is the culprit? I don't think it is, but if it is then I'll help get the word to Troubada/Trinket so he can resolve the issue, once you have verified the need.Cheers and Regards Edited September 13, 2011 by bphlpt Quote
crashfly Posted September 13, 2011 Posted September 13, 2011 @crashfly - Can you verify whether it is the .NET 4 installer that is the culprit? I don't think it is, but if it is then I'll help get the word to Troubada/Trinket so he can resolve the issue, once you have verified the need.Cheers and RegardsI already let them know it was not the .net 4 installer. I only posted that image as it appears as the silent installers are starting. I cannot tell if the problem is from a driver installation (it may be that), or from an update. Unlike Windows XP, Windows 7 does not have a "clear" explanation of the install process (in other words, at time period xx, such and such happens). Quote
hornet512 Posted September 23, 2011 Posted September 23, 2011 w7toolkit 1.3.0.47 shows an error: "System couldn't find the file"c:\users\ctn\desktop\packages.exe /p ...When I hit the ok button, everything is ok. Is that an error?Cheers. Quote
Legolash2o Posted September 23, 2011 Author Posted September 23, 2011 What was you doing? Component Removal? All-In-One Integrator? Quote
oguz Posted September 23, 2011 Posted September 23, 2011 What was you doing? Component Removal? All-In-One Integrator?Wellcome back Quote
crashfly Posted September 24, 2011 Posted September 24, 2011 w7toolkit 1.3.0.47 shows an error: "System couldn't find the file"c:\users\ctn\desktop\packages.exe /p ...When I hit the ok button, everything is ok. Is that an error?Cheers.I have had this problem occur too. It is usually random, but I often see it during the addons section. It is total random. Typically, starting over and performing the "run" again, I do not see the problem. Quote
hornet512 Posted September 24, 2011 Posted September 24, 2011 I have integrated 10 win7toolkit addons and one rocco's unattended messenger 2011 to my win7 DVD succesfully.Almost at the end of win7 installation a W7T Runonce (d:) captioned form waits me check or uncheck 4 addons.They are malicius software remowal tool, Reaper's framework4, Reapers's adobe flash and adobe java.when I hit the start button, installation instals 4 addons.I don't want to interrup my installation. Any idea ? Quote
crashfly Posted September 24, 2011 Posted September 24, 2011 I have integrated 10 win7toolkit addons and one rocco's unattended messenger 2011 to my win7 DVD succesfully.Almost at the end of win7 installation a W7T Runonce (d:) captioned form waits me check or uncheck 4 addons.They are malicius software remowal tool, Reaper's framework4, Reapers's adobe flash and adobe java.when I hit the start button, installation instals 4 addons.I don't want to interrup my installation. Any idea ?When integrated, did you have them set to "always run"? If not, you will get the question about select the installs you want to run. Quote
hornet512 Posted September 26, 2011 Posted September 26, 2011 When integrated, did you have them set to "always run"? If not, you will get the question about select the installs you want to run.Thanks answering.I have "always install" options checked. I had an uttanded exe installer Roccos_WLMessenger_unattanded_15.4.3508.1109_tr.exeWhen I deleted it from silent instals, no problem occured. I think that file causes the problem.Regards. Quote
Legolash2o Posted October 14, 2011 Author Posted October 14, 2011 (edited) Hey guys just letting you know i've fixed a problem with unattended causing a strange error when applying unattended. Will be in v49 EDIT: Also fixed importing unattended files when it contains users.----------------------v49 released*FIX: Error importing previous unattended files*FIX: Error applying unattended when adding multiple users*FIX: Object error during Component RemovalYou will have to re-create your unattended file, you can however use the 'Import' feature in Unattended Creator.Also, when adding msu to silent installers (AIO) you don't have to add a syntax i.e. /quiet /norestart as its done by default.----------------------v50 released.*FIX: Multiple fixes to the RunOnce InstallerI've made quite a few enhancements to the RunOnce installer including getting it's RAM usage from 15MB to 3.5MB and fixed a few bugs.*SoLoR Updates will show new updates at the top*RunOnce Installer let's you change background and logo Edited October 14, 2011 by Legolash2o Quote
Legolash2o Posted October 14, 2011 Author Posted October 14, 2011 Hey guys, W7T is currently on build 50 and i'm considering making the next release BETA and not alpha, what do you guys think? Do you think it's too buggy for BETA status? Quote
filter Posted October 14, 2011 Posted October 14, 2011 i have made many aio disks, with updates, programs addon, tweaks.... all work great. i have found a bug (not serious) in 48 when i add silent installers sometimes dont add some of them. i continue to add programs. after i add the programs that missing and its ok. anyway, my opinion its ok for beta status. great tool!!! if you can add a remove option for themes (nobody use it, just keep the default theme) Quote
Legolash2o Posted October 14, 2011 Author Posted October 14, 2011 (edited) I'll have a look at that silent installer issue and i've added 3 things to the AIO component removalEase of Access Themes - Removes all East of Access ThemesAero Theme - Removes just the Aero ThemeNon-Aero Themes - Removes all themes in the 'Themes' folder except AeroI'm in the process of adding it into Component Removal tool as well. EDIT: Done. Edited October 14, 2011 by Legolash2o Quote
oguz Posted October 14, 2011 Posted October 14, 2011 i have made many aio disks, with updates, programs addon, tweaks.... all work great. i have found a bug (not serious) in 48 when i add silent installers sometimes dont add some of them. i continue to add programs. after i add the programs that missing and its ok. anyway, my opinion its ok for beta status. great tool!!! if you can add a remove option for themes (nobody use it, just keep the default theme)Can this bug exist in your computer? After v50 the program seems to work pretty stable. Quote
rulman Posted October 15, 2011 Posted October 15, 2011 (edited) Themes may be better to remove an option,Now working as a stable several options,Published as a beta, this beautiful ideaMay be a bit empty, but a request;The default color as cmd.exe "1a" or "a" Can we set it as?Can be added to tweak IE Desktop IconLast_Session(15-10-2011_0815AM).ini Edited October 15, 2011 by rulman Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.